• Les durcisseurs français

    PRODUCTS FOR

    6 boulevard de Strasbourg
    77600 BUSSY ST GEORGES
    Tel.: 01.64.76.44.00 - Fax : 01.64.76.44.01

    Nos locaux

    Nos locaux

    Nos locaux


SURFAPOX AL - Self-smoothings

A
nti-dust warranty

Documentations of the product at the following format:

 

P
lease fill the form or get in contact with us if you need information on our product.

From our email address: commercial@durcisseurs-francais.fr


D
escription

SURFAPOX AL is an self-smoothing mortar with solent-free resin, special loads:

       
       
  • SURAPOX AL3 for thickness 2 to 3 mm
  •    
  • SURFAPOX AL5 for thickness 3 to 5 mm
  •    
  • SURFAPOX AL8 for thickness 5 to 8 mm
           
          Three components:
           
         
  • Resin
  •      
  • Hardener
  •      
  • Special loads
 

M
ode of application

Preparation of the support: The concrete has to be dry, clean, healthy and homogeneous, beforehand prepared by chemical, thermical and mechanical action (shot-blasting, planing, sanding) and dust removal. Wholes, joints, crackings and flastness defects will be treated with a suitable resin mortar (SURFAPOX TR).

Implementation: Apply SURFAPRIM AL, an adhesion primar with roller, 200 to 400 gr/m² upon the susbrate porosity. A second layer can be necessary.
On dry primer, apply the three mixed components of mortar
SURFAPOX in a blender during 4 to 4 minutes in order to obtain a perfect homogenous product. Pour the mortar on the floor, drawn with a scraper of equalization upon the required thickness and carefully bubble-free.
Application temperature: 10° to 30°C.

Material cleaning: with special diluent or acetone, mibk, trichlore, alcohol,…, according to the safety instructions.

 

C
haracteristics

     
  • Density : 1,080 (A+B)
         
  • Loading 3: 1,680
  •      
  • Loading 5: 1,675
  •      
  • Loading 8: 1,670
       
       
  • Dry extract: 100 %
  •    
  • Appereance: glossy or satin, smooth or anti-slip
  •    
  • Use: 4.8 kg for thickness 3 mm, depending on the roughness of the support
  •    
  • AFNOR Classification: Standard T36005 – Category I – Class 6B
           
          Resistances :
           
         
  • Compression: 65 N/mm2
  •      
  • Flexion: 30 N/mm2
  •      
  • Heat: 50° C en continu
       
       
  • Grip: 2,11 MPA
  •    
  • Flash point: 84°C
  •    
  • Auto-ignition temperature: >300°C
  •    
  • Fire classification: M3
  •    
  • Low stress of odour (contains at least one reactive diluent)
  •    
  • Wear resistance (TABER test): loss 0.03 gr after 500 rotations
  •    
  • No dust emission
  •    
  • Easy tp clean
  •    
  • Water resistant
  •    
  • Chemicals resistant: dilution of acids after 8 days
  •    
  • Mix resin/hardener lifetime jar 45 minutes at 20°C
           
          Dry at 20°C:
           
         
  • 24 h for moderate traffic (pedestrian)
  •      
  • 48 to 72 h with standard traffic
  •      
  • 8 days for high traffic and defined chemical resistance
 

A
pplication

SURFAPOX AL can be applied for renovation as well as on new floors in warehouse, workshop, aerospace, agrofood, electronic industries, laboratories, hospitals, schools, shopping centre ...

 

P
ackaging

     
  • Kits 15 kg (A + B)
  •  
  • Special loads: sacks 32 kg
  •        
          Storage: 6 months in the original packaging between 10 to 25°C
 

C
olouring

     
  • With the choice following the colour chart RAL
  •  
  • Other colours available upon request
 

F
inishing

Le SURFAPOX AL is naturally smooth and glossy, its aspect can be modified with the following addenda:

           
          Non-skid:
           
         
  • By quartz spray or corundim of various grades
  •      
  • By applying a layer of resin SURFAPOX THIXO with "orange peel" aspect
           
          Decorative:
           
         
  • Mottled:
          On fresh resin, spraying of fine flakes on the surface, then colorless coating:
           
         
  • Smooth: SURFAPOX FL resin
  •      
  • "Orange peel": SURFAPOX THIXO resin
           
         
  • Flakes:
          On fresh resin, spray medium-sized coloured flakes more or less thick. After drying, suck from non-sticky flakes then apply on or more layers of colourless coating.
           
         
  • Smooth: SURFAPOX FL resin
  •      
  • "Orange peel": SURFAPOX THIXO resin
          Fluctuations and density of powdering, choice of colours offer a large range of aspects allowing a customized floor.
 

H
ealth and safety

       
       
  • Keep packaging tightly closed
  •    
  • Store in a well-ventilated place
  •    
  • Take normal safety precautions to handle a chemical
  •    
  • Epoxy resin: may have a sensitising effect on the body
  •    
  • Special hardener: dangerous compound (Aliphatic Polyamine)
  •    
  • Gloves, goggles during application
  •    
  • Do not eat, drink or smoke during application
  •    
  • Avoid inhalation of fumes
 
 
LIMITATION OF LIABILITY
The information contained in this leaflet is provided for guidance based on our lnowledge. It does not constitute a waiver of our terms and conditions of sale an shall in no event imply any waranty by us or render us liable with regard to the use of our products. For each project, a study should be jointly conducted with us.
The choice of the thickness of SURFAPOX AL to be applied must take into account the quality of substrate, and the required finish and performance.